Close

Picture of Challenger EV1520

Challenger EV1520


15000 lbs Capacity Heavy-Duty electric/hydraulic inground lift w/ chrome pistons, heavy-duty 2-stage arms. Drive over operation
Manufacturer: CHALLENGER LIFTS

 Features & Benefits

Larger chrome diameter pistons NEW larger 8 1/2" chrome diameter piston provides greater stability for inground lift. Stainless steel air lock release Stainless Steel air lock release cylinder promotes longer working life with its corrosion resistant design.
Enhanced raised wiper NEW enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings. Fully contained and sealed recycled polymer cassette tub Fully contained and sealed recycled polymer cassette tub eliminates risk of hydraulic fluid seeping into the ground.
Over 50 percent longer bearing contact Over 50% longer bearing contact than competitor heavy duty lifts and provides increased stability. Standard combination stack screw pads accommodate a wide range of vehicle pick up points
Mechanical lock enganges every 3" Mechanical lock engages every 3" provides safety and allows technician to work at their ergonomic height to increase productivity and minimizes fatigue.

Specifications

Model Number
EV1520

Inground Lifts Capacity

15,000 lbs. (6806kg)

Stroke

68" (1727mm)
A Rise Height1
84-3/4" (2153mm)
B Width Overall
71-1/2" (1816mm)
C Drive-Thru Clearance
N/A
D Reach (Arm Minimum)
26-1/4" (667mm)
E Reach (Arm Maximum)
43" (1092mm)
F Adj. Adapter Height2
6-1/2 - 8-1/4"
(165 - 210mm)
G Adj. Adapter Height2
(with Medium Extensions)
10-1/2" - 12-3/4"
(267 - 324mm)
H Adj. Adapter Height2
(with High Extensions)
14-1/2" - 16-3/4"
(368 - 425mm)
Capacity (Per Arm)
3750 lbs. (1701kg)
Guide Plunge Diameter
8-1/2" (216mm)
Motor
2HP
Voltage (Single Phase Std.)3
208v-230v
Speed of Rise
60 seconds
Air Required
75-125 psi
Ceiling Height Required
85"
(2159mm) plus height of tallest vehicle
Shipping Weight
3100 lbs. (1406 kg)

1 Heavy Duty Inground Lifts Rise Height is measured with superstructure in highest position.
2 Medium and high auxiliary adapter extensions are standard.
3 Optional 3 phase electrical also available. Specify at time of order.
Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.


EV1520 Inground Lifts